Знайти

Київ

+38 (044) 353 74 43

Ваш кошик

 0 - 0.00 грн -

Підписатися на розсилку

Підписатися на розсилку

Дізнавайтеся першими про наші акції та цікаві пропозиції. Ви завжди зможете відмовитися від розсилки в майбутньому.

HotPoint 4600

HotPoint 4600 Outdoor Access Point.

Виробник:

Код товару: # 1595

на
складі

UP DOWN

Характеристики

FireTide HotPoint 4600 Outdoor Access Point

  • IEEE 802.11b/g
  • Up to 16 SSIDs per HotPoint
  • Up to 16 independent VLANs
  • 802.11i, WPA2
  • 40 bit, 104 bit WEP keys
  • 128 bit, 256 bit AES keys
  • 802.1x, RADIUS authentication
  • Up to 64 concurrent users simultaneously per HotPoint
  • One 10/100 autosense Base-T port
  • Operating temperature: -20º C to +55º C (-4º F to +131º F)
Firetide HotPoint wireless access points deliver a modular access solution for large scale, indoor and outdoor wireless mesh networks. Modular design enables full network and software integration of the access points with a Firetide wireless mesh network while at the same time permitting independent physical placement of the hardware to provide optimal accessibility for Wi-Fi clients.

Seamless Outdoor and Indoor Operation
Outdoor HotPoint 4600 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port. These units support high gain antennas and can receive power directly from a connected mesh node eliminating the need for an external power supply.

Indoor HotPoint 4500 access points provide wireless access within buildings and moving vehicles. Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.

Access On or Off the Mesh
HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling. HotPoint access points can also connect directly to a conventional wired infrastructure eliminating the need to install a mesh node in locations where wired connectivity is readily available.

Modularity for Flexible Placement
Unlike conventional mesh networks that combine mesh backhaul and Wi-Fi access in the same enclosure, Firetide mesh nodes and access points can be physically separated allowing system integrators to optimize RF separately for both the mesh backhaul as well as client access.

For example, in a multi-building mesh network, mesh nodes should be placed in areas that enable the best connectivity between buildings which is typically at higher locations. However the best locations for the access points tend to be lower to provide the best connectivity for Wi-Fi clients inside a building. Because the access points and mesh nodes are kept in separate enclosures, they can be independently positioned for optimal RF connectivity.

Single-point Network Management for Mesh and Access
Whether connected directly to a Firetide wireless mesh network or to a wired infrastructure, the HotPoint access points are fully integrated and managed with the same HotView software used to manage Firetide mesh nodes. HotView provides remote management from a centralized location and users can manage all mesh and access traffic from a single console.

Advanced Security and Performance Features
HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs, industry compliant QoS, and durable enclosures. High-power radios with up to 400 mW provide extended reach and outstanding penetration.

Designed for Hot Spots
Layered service levels can be enabled through Virtual APs (VAPs) and Virtual AP Groups. Each HotPoint AP supports up to 16 VAPs, creating different logical networks with varying levels of security, access, and performance. Additional Hot Spot features include user-based rate limiting and intracell blocking.

Подібне