Ваш кошик

0 - 0.00 грн -

Підписатися на розсилку

Підписатися на розсилку

Дізнавайтеся першими про наші акції та цікаві пропозиції. Ви завжди зможете відмовитися від розсилки в майбутньому.

CyberData VoIP Intercom

CyberData VoIP Intercom is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) two-way communications device that easily connects into existing local area networks (LANs) with a single cable connection.

Виробник:

Код товару: # 1727

на
складі

Характеристики

The CyberData SIP-enabled VoIP Intercom is a Power-over-Ethernet (PoE 802.3af) and Voice-over-IP (VoIP) two-way communications device that easily connects into existing local area networks (LANs) with a single cable connection. The intercom is compatible with most SIP-based IP PBX servers that comply with SIP RFC 3261. Its tamper-resistant design allows unit to be mounted securely and safely.

CyberData VoIP Intercom Typical Applications:

  • Access control
  • Door entry phone
  • Emergency phone
  • Mass notification

CyberData VoIP Intercom Typical Features:
  • PoE 802.3af enabled (Powered-over-Ethernet)
  • SIP Support
  • Dual-speed Ethernet 10/100 Mpbs
  • Adaptive full-duplex voice operation
  • Network web management
  • Network adjustable speaker volume
  • Network adjustable mic sensitivity
  • Network downloadable firmware
  • Doubles as a paging speaker
  • Tamper-proof design
  • Dry relay contact for auxiliary control
  • Two-way hands-free communications
  • Configurable relay-on time
  • Connects to a designated PBX extension

CyberData VoIP Intercom Configurable Feature List:

1) Network Adjustable Volume

2) Network Adjustable Microphone Gain

3) Open Door Sensor
If wired to a switch on a door, this event can trigger the following multiple actions based on a time value entered:
  • Flash the LED
  • Activate the relay
  • Send an audio message to a specific extension
  • Send and repeat an audio message to the Intercom's speaker
  • Select either door sensor normally open or closed contacts

4) Tamper Sensor
The Intercom has a built-in optical intrusion detector that will trigger when face plate is removed from the housing. Multiple actions (based on the values set) can trigger different events such as the following:
  • Flash the LED
  • Activate the relay
  • Send an audio message to a specific extension
  • Send and repeat an audio message to the Intercom's speaker

5) Auto Answer
  • Intercom will auto-answer or ring until the Call button is pressed

6) Relay Control
  • Activate when the Intercom is being called
  • Activate on call out (time value can be set)
  • Activate remotely via DTMF (time value can be set)

7) Button Light
  • Button light on or off at idle state

8) Ring back Tone
  • Enable / disable ringback tone



Ethernet I/F 10/100 Mpbs
Power Input PoE 802.3af compliant or +5 volts at 1000mA
Protocol SIP RFC 3261 Compatible
Payload Types G711
Regulatory Compliance FCC Class A, UL 60950
Warranty 2 Years Limited
Dimensions 5" x 5" x 2.5"
Part Number 010935

tot:0.268
clr: 14
cch:
qrt:0.203